广西2021年早晚籼优质稻主要品种品质测报分析（网络首发、推荐阅读）

通过对广西2021年度推广种植的野香优、广粮香2号、百香、丝香四个主要品种系列的早晚籼优质稻谷品种进行采样，按照《优质稻谷》《中国好粮油 稻谷》《广西好粮油 广西香米》标准中规定质量品质指标进行检测，并依据检测数据对四个主要稻谷品种在不同季节、不同种植区域以及同一种植区域不同种植季节品质变化情况进行对比分析研究，寻找优质稻因品种、产地、种植季节不同对其品质的影响规律，为优质稻谷品种的选育和推广种植工作提供科学依据和数据支持，促进广西优质粮食产业和“广西香米”产业进一步发展。     

Wet-oxygen corrosion resistance and mechanism of bi-layer Mullite/SiC coating for Cf/SiC composites

A bi-layer oxidation-resistant coating consisting of a mullite outer coating, and a SiC inner coating on the surface of C_f/SiC composites was prepared by the chemical vapour deposition and an air spray sol-gel process, and its corrosion behavior was evaluated in a wet-oxygen coupling environment. Results show that the formation of SiO₂ glass layer and its reaction with mullite particles to form aluminosilicate glass layer, leading to an increase in the density of the mullite outer coating, so that the weight loss of bi-layer Mullite/SiC coating coated C/SiC sample was only 1.11 × 10^?3 g·cm^?2 in the first 100 h of oxidation. However, the weight loss of the coated sample reached 26.82 × 10^?3 g·cm^?2 after 200 h of oxidation due to a part of the mullite outer coating was detached. The SiO₂ glass phase reacted with water vapour to generate gaseous Si(OH)_x, which created distinct holes on the surface of the SiO₂ glass layer or inside the molten aluminosilicate glass layer. Eventually, the mullite outer coating was blistered and detached from the surface of the sample due to the combination and growth of holes.     

西湖凹陷中部西斜坡地区超压成因机制

沉积盆地超压成因研究已取得了重要进展，关于超压主要成因的认识也发生了重要变化，以往一些被普遍认为属于典型不均衡压实成因的超压已被部分或完全否定，生烃作用作为超压成因的普遍性得到愈来愈多的证实。西湖凹陷多个构造带的不同层位均发育超压，目前认为超压的形成仍然离不开不均衡压实（欠压实作用）的贡献。根据异常压力形成的基本地质条件和异常压力产生的地质、地球物理效应两方面因素，利用测井曲线组合分析法、鲍尔斯法（加载-卸载曲线法）、声波速度-密度交会图法、孔隙度对比法、压力计算反推法以及综合分析法系统解剖分析了西湖凹陷中部西斜坡地区平湖组不同岩性异常压力成因。研究结果表明：西湖凹陷中部西斜坡泥岩中烃源岩超压主要为自源生烃增压，非烃源岩超压为邻源压力传导成因。储层中至少存在常压-超压型和常压-超压-常压型两种压力结构类型，异常压力自南向北顶界面逐渐变深，主要为油气在生烃增压驱动下向储层运移过程中的压力传导所致。     

气瓶内部淬火过程的流动换热特性

 大直径厚壁气瓶内部淬火时的流动换热过程极其复杂，受到多种因素的影响，而研究气瓶内部压强和温度的变化规律对改善流动换热效果、提高产品组织性能具有重要的理论指导意义。以914 mm厚壁气瓶和瓶内流体为研究对象，建立了二维等效流 固耦合模型；采用多喷嘴系统对气瓶内外进行喷水淬火，研究了气瓶总长、喷水流速及淬火时间对瓶内压强及内壁温度的影响，通过间歇淬火试验验证了数学模型的正确性。结果发现，气瓶长度对瓶内压强和瓶壁温度的影响显著，喷水流速次之，当喷水流速大于8 m/s后，水量对瓶壁的冷却效果大大降低；气瓶内壁长度方向的温度梯度分别随气瓶总长的增加和淬火时间的延长而减小，但基本不受喷水量的影响。     

Simplification and applicability studies of a hydrogen-air detailed reaction mechanism

The research of hydrogen fuel internal combustion engine (HICE) had great significance facing the challenges of energy and environmental problems. Based on the detailed hydrogen-air reaction mechanism, the pre-mix model of CHEMKIN-Pro software was selected to simplify the detailed mechanism GRI-3.0. The most important elements and reactions was chose to construct framework mechanism firstly based on the sensitivity coefficient for H₂O and NO formation, and additional elements and reactions were added to framework mechanism for complementing the oxidation path of N2 and H₂. A simplified mechanism including 24-step elementary reaction was obtained and the laminar burning velocity calculated by this simplified mechanism matches well with the detailed mechanism in a wide range. This simplified mechanism was also applied in a CFD model which predicted the cylinder instantaneous pressure and NOx emission accurately within a large range of fuel air equivalent ratio. Showing that this mechanism has good applicability.     

深井超深井钻井堵漏材料高温老化性能评价

深井超深井钻进裂缝性油气层极易发生频繁的钻井液漏失,造成严重储层损害和重大经济损失。储层段钻进过程中经常发生重复性漏失,意味着仅用酸溶率、粒度分布等常规堵漏材料评价指标已不能满足钻井液漏失控制工程需要。笔者以塔里木盆地克深气田钻井常用的核桃壳、毫米级碳酸钙为研究对象,开展了堵漏材料高温老化评价实验。实验评价结果表明,在180℃的柴油中老化24 h后,核桃壳的颜色由黄色变成黑色,质量损失率为25.16 % ,摩擦系数下降28.24 % ,抗压强度下降21.21 % ;毫米级碳酸钙的颜色由白色变成淡黄色,质量损失率为2.47 % ,摩擦系数下降1.33 % ,抗压强度基本不变;由高温老化后的核桃壳和毫米级碳酸钙所形成的封堵层,其承压能力下降了48.84 % 。分析指出,堵漏材料高温老化失效是深井超深井裂缝封堵层结构破坏并在储层段发生重复性漏失的一个重要因素。